info
I respectfully acknowledge the Wurundjeri People of the Kulin Nation, who are the Traditional Owners of the unceded land on which I live, work and create. I pay my respects to Elders past, present
and emerging.
Here you’ll find info about the e-commerce print shop. If you’re looking for artist info please visit the about page ︎︎︎
My print shop is entirely independently/artist-owned and ethically run. All artworks are printed and shipped from Melbourne / Naarm using only local small businesses / independent printers.
Buying art/prints directly from creatives and our small businesses is the best way to support us! Thank you!
I am committed to the continued development and improvement of sustainable and ethical practices within the business and have provided ample information on production and practices for the purposes of full transparency.
︎︎︎ Sustainability & Production
Sustainability is a fundamental value of mine and I am deeply committed to holding it at the forefront of everything I do, personally and
in business.
Sustainability has been held at the forefront of the development & production of all these fine art prints. I have sourced aligned partners to produce the highest quality prints with the smallest ecological footprint possible. The paper stock has been carefully curated for its high quality, look & low ecological impact. Each print is made to order and the good news is that short-run printing (print on demand) is more resource-efficient than offset or large-run. Printing on an as-needed basis eliminates the impact of wasteful overprinting.
The process is water-free, and ink cartridges are recycled through Close The Loop. No solvent inks or resin-based papers are used. The minimal paper offcuts are used for samples or in the case of smaller scrap, re-pulped.
Cotton fine art papers use cotton linter, a by-product from the textile and oil industries. Because cotton paper recycles discarded linter, it has no extra environmental impact. No cotton is grown specifically for paper, and linters would go to waste if it weren't for the production of cotton paper.
Tubes and print boxes are made from recycled materials, and are recyclable (if you don’t plan to reuse them). Where possible, all plastic protective packaging is replaced by paper and the use of tubes and print boxes avoid the need for wasteful plastic-based bubble wrap/void fill/excessive packaging. Any additional collateral (such as a care card) is made from recycled paper and is kept to a minimum.
These prints are made with the very best materials: museum grade fine art paper and Epson UltraChrome HDX aqueous inks.
Archival pigment prints will last for 80+ years under the correct conditions.
Further care information will be provided on a care card and via email upon ordering.
︎︎︎ FAQ
How many prints are in each edition?
There are 60 of each size at 8x12” 12x16” 16x24”
& 30 of each size at 20x30” & 28x42” (Only Circular #2, #3, #4).
The quantity of limited editions of prints is designed to allow for the use of the highest quality archival fine art paper (310gsm) that will (literally) last a lifetime whilst keeping the price range reasonable.
Please note that some artworks come in 3 sizes and some in 5 sizes. This will affect the total number of reproductions of each artwork.
Do they come in a frame?
No, the prints are sold alone without a frame. Unfortunately at this stage, it is a much more viable option to get the print framed by your trusty local framer once it arrives to you.
Please consider the potential costs of framing before purchasing a print. You can reach out to your framer of choice for a quote.
Your print will arrive in protective material however it is recommended to get it framed as soon as possible to prevent any damage.
Prints should be framed by an experienced professional who uses archival materials and UV resistant glass/perspex to preserve maximum quality and maximise the lifetime.
If you intend to buy a ready-made frame, it is recommended that you ensure it still has the above qualities if possible or acknowledge that you may not get the same longevity of the artwork.
I want to buy a gift... help
I now offer gift cards here.
You will recieve a code upon purchase that you can pass onto your recipient.
Prints are subject to availability.
Some recommended Melbourne based framers:
Ernest Framing (Footscray)
Holbrook Workshop (Richmond)
Icon Frames (Malvern)
Ready-Made / DIY (Budget) Frames:
FRAMES READYMADE (Brunswick) - please note these ready-made frames do not use UV resistant/Museum glass.
No responsibility is taken for the framing or care of the prints once in your possession. Please use your own discernment when working with any handler.
On the Shop page (link) there are some photo examples of some prints with both wooden or white frames.
Please reach out if you have any further questions ︎︎︎
Do you sell note cards?
Notecards are currently in development, soon to be released!
Follow me on social media to get updated
when they’re released.
![]()
︎︎︎ Shipping
All prints are made to order. This means that:
︎︎︎ You place an order
︎︎︎ Orders placed until Monday 4pm are sent to print the
following Tuesday
︎︎︎ 4-6 business day printing turnaround time
︎︎︎ Prints are quality checked and signed by me
︎︎︎ Order is shipped within 1-2 business days of printing completion
︎︎︎ Order is delivered (usually within a week to places in Australia depending on city + postage times)
Australia
From the time you place your order, you can expect to receive your print in 2-4 weeks (depending on the day of the week ordered & which location you live in)
If you’d like to calculate further - most orders are delivered within two weeks from the following Tuesday after you order.
You will be notified of all estimated wait times upon ordering and this information is updated regularly to reflect current turnaround times received by the printer and postage times from the delivery partner.
Express postage is available to get your print as soon as possible once it is printed.
Fast-tracked printing is not available and will always take 4-6 business days from the following Tuesday after you order.
All orders are shipped with tracking by either Auspost, Sendle or DHL.
Standard Shipping: $15
Express Shipping: $20
International
International shipping is available to a wide range of countries all over the world. International Shipping Rates range from AUD$35-50 and are calculated at checkout.
All orders are shipped with tracking by either Auspost, Sendle or DHL.
Please note due to ongoing delays, delivery time cannot be guaranteed and may take up to 8 weeks from the order date.
All international orders will be shipped in a tube to ensure maximum protection on the long journey.
Delivery estimates will be emailed in the order confirmation or are available on request via email.
The buyer is responsible for all local taxes incurred.
Please make sure to be familiar with the International Shipping T&Cs.
If you are unsure of anything, please get in touch.
︎︎︎ Returns
As each print is part of a limited edition and made to order, there are strictly no returns/exchanges for any reason other than a faulty item. Each order is quality checked before shipping but in the rare case there is a major fault with the print you receive, a replacement or refund will be issued upon its return. If you are unsure, please get in touch.
︎︎︎ Care
Prints should be framed by an experienced professional who uses archival materials and UV resistant glass/perspex to preserve maximum quality and maximise the lifetime.
If you intend to buy a ready-made frame, it is recommended that you ensure it still has the above qualities.
Hang your framed print in a cool, dry place away from regular strong, direct light. Avoid places prone to humidity or temperature fluctuations.
Your print will arrive in protective material and it is recommended to get it framed as soon as possible to prevent any damage.
Leave print in provided protective material until you hand it over to your framer.
When unrolling your print (for larger prints), always slide the paper band off, never unpick the tape. You want to avoid any kind of adhesives being anywhere near your print.
These prints are made with the very best materials: museum grade fine art paper and Epson UltraChrome HDX aqueous inks.
Archival pigment prints will last for 80+ years under the correct conditions.
A further detailed care card is provided with the print and via email to refer back to.
All orders are subject to terms and conditions.
︎︎︎ Contact
Please read through all info and FAQ before sending an email enquiry to make sure your question isn’t already answered!
For any further shop queries please email:
shop@gertiehall.com
I will endeavour to get back to you within 3 business days.
For all other business enquiries including commissions please email:
hello@gertiehall.com
and emerging.
Here you’ll find info about the e-commerce print shop. If you’re looking for artist info please visit the about page ︎︎︎
My print shop is entirely independently/artist-owned and ethically run. All artworks are printed and shipped from Melbourne / Naarm using only local small businesses / independent printers.
Buying art/prints directly from creatives and our small businesses is the best way to support us! Thank you!
I am committed to the continued development and improvement of sustainable and ethical practices within the business and have provided ample information on production and practices for the purposes of full transparency.
︎︎︎ Sustainability & Production
Sustainability is a fundamental value of mine and I am deeply committed to holding it at the forefront of everything I do, personally and
in business.
Sustainability has been held at the forefront of the development & production of all these fine art prints. I have sourced aligned partners to produce the highest quality prints with the smallest ecological footprint possible. The paper stock has been carefully curated for its high quality, look & low ecological impact. Each print is made to order and the good news is that short-run printing (print on demand) is more resource-efficient than offset or large-run. Printing on an as-needed basis eliminates the impact of wasteful overprinting.
The process is water-free, and ink cartridges are recycled through Close The Loop. No solvent inks or resin-based papers are used. The minimal paper offcuts are used for samples or in the case of smaller scrap, re-pulped.
Cotton fine art papers use cotton linter, a by-product from the textile and oil industries. Because cotton paper recycles discarded linter, it has no extra environmental impact. No cotton is grown specifically for paper, and linters would go to waste if it weren't for the production of cotton paper.
Tubes and print boxes are made from recycled materials, and are recyclable (if you don’t plan to reuse them). Where possible, all plastic protective packaging is replaced by paper and the use of tubes and print boxes avoid the need for wasteful plastic-based bubble wrap/void fill/excessive packaging. Any additional collateral (such as a care card) is made from recycled paper and is kept to a minimum.
These prints are made with the very best materials: museum grade fine art paper and Epson UltraChrome HDX aqueous inks.
Archival pigment prints will last for 80+ years under the correct conditions.
Further care information will be provided on a care card and via email upon ordering.
︎︎︎ FAQ
How many prints are in each edition?
There are 60 of each size at 8x12” 12x16” 16x24”
& 30 of each size at 20x30” & 28x42” (Only Circular #2, #3, #4).
The quantity of limited editions of prints is designed to allow for the use of the highest quality archival fine art paper (310gsm) that will (literally) last a lifetime whilst keeping the price range reasonable.
Please note that some artworks come in 3 sizes and some in 5 sizes. This will affect the total number of reproductions of each artwork.
Do they come in a frame?
No, the prints are sold alone without a frame. Unfortunately at this stage, it is a much more viable option to get the print framed by your trusty local framer once it arrives to you.
Please consider the potential costs of framing before purchasing a print. You can reach out to your framer of choice for a quote.
Your print will arrive in protective material however it is recommended to get it framed as soon as possible to prevent any damage.
Prints should be framed by an experienced professional who uses archival materials and UV resistant glass/perspex to preserve maximum quality and maximise the lifetime.
If you intend to buy a ready-made frame, it is recommended that you ensure it still has the above qualities if possible or acknowledge that you may not get the same longevity of the artwork.
I want to buy a gift... help
I now offer gift cards here.
You will recieve a code upon purchase that you can pass onto your recipient.
Prints are subject to availability.
Some recommended Melbourne based framers:
Ernest Framing (Footscray)
Holbrook Workshop (Richmond)
Icon Frames (Malvern)
Ready-Made / DIY (Budget) Frames:
FRAMES READYMADE (Brunswick) - please note these ready-made frames do not use UV resistant/Museum glass.
No responsibility is taken for the framing or care of the prints once in your possession. Please use your own discernment when working with any handler.
On the Shop page (link) there are some photo examples of some prints with both wooden or white frames.
Please reach out if you have any further questions ︎︎︎
Do you sell note cards?
Notecards are currently in development, soon to be released!
Follow me on social media to get updated
when they’re released.
︎︎︎ Shipping
All prints are made to order. This means that:
︎︎︎ You place an order
︎︎︎ Orders placed until Monday 4pm are sent to print the
following Tuesday
︎︎︎ 4-6 business day printing turnaround time
︎︎︎ Prints are quality checked and signed by me
︎︎︎ Order is shipped within 1-2 business days of printing completion
︎︎︎ Order is delivered (usually within a week to places in Australia depending on city + postage times)
Australia
From the time you place your order, you can expect to receive your print in 2-4 weeks (depending on the day of the week ordered & which location you live in)
If you’d like to calculate further - most orders are delivered within two weeks from the following Tuesday after you order.
You will be notified of all estimated wait times upon ordering and this information is updated regularly to reflect current turnaround times received by the printer and postage times from the delivery partner.
Express postage is available to get your print as soon as possible once it is printed.
Fast-tracked printing is not available and will always take 4-6 business days from the following Tuesday after you order.
All orders are shipped with tracking by either Auspost, Sendle or DHL.
Standard Shipping: $15
Express Shipping: $20
International
International shipping is available to a wide range of countries all over the world. International Shipping Rates range from AUD$35-50 and are calculated at checkout.
All orders are shipped with tracking by either Auspost, Sendle or DHL.
Please note due to ongoing delays, delivery time cannot be guaranteed and may take up to 8 weeks from the order date.
All international orders will be shipped in a tube to ensure maximum protection on the long journey.
Delivery estimates will be emailed in the order confirmation or are available on request via email.
The buyer is responsible for all local taxes incurred.
Please make sure to be familiar with the International Shipping T&Cs.
If you are unsure of anything, please get in touch.
︎︎︎ Returns
As each print is part of a limited edition and made to order, there are strictly no returns/exchanges for any reason other than a faulty item. Each order is quality checked before shipping but in the rare case there is a major fault with the print you receive, a replacement or refund will be issued upon its return. If you are unsure, please get in touch.
︎︎︎ Care
Prints should be framed by an experienced professional who uses archival materials and UV resistant glass/perspex to preserve maximum quality and maximise the lifetime.
If you intend to buy a ready-made frame, it is recommended that you ensure it still has the above qualities.
Hang your framed print in a cool, dry place away from regular strong, direct light. Avoid places prone to humidity or temperature fluctuations.
Your print will arrive in protective material and it is recommended to get it framed as soon as possible to prevent any damage.
Leave print in provided protective material until you hand it over to your framer.
When unrolling your print (for larger prints), always slide the paper band off, never unpick the tape. You want to avoid any kind of adhesives being anywhere near your print.
These prints are made with the very best materials: museum grade fine art paper and Epson UltraChrome HDX aqueous inks.
Archival pigment prints will last for 80+ years under the correct conditions.
A further detailed care card is provided with the print and via email to refer back to.
All orders are subject to terms and conditions.
︎︎︎ Contact
Please read through all info and FAQ before sending an email enquiry to make sure your question isn’t already answered!
For any further shop queries please email:
shop@gertiehall.com
I will endeavour to get back to you within 3 business days.
For all other business enquiries including commissions please email:
hello@gertiehall.com
Website Designed and Developed by Gertie Hall
© Copyright Gertie Hall 2022
ABN 86 163 675 345
© Copyright Gertie Hall 2022
ABN 86 163 675 345